Camber Kits

Use this pair (2) of cam bolts to double the adjustment range for rear camber and toe on GM's Epsilon platform. The OE cams only give one degree of change, this is often not enough camber and you may quickly run out of toe. The innovative design...

Replace the factory torque-to-yield (TTY) rear camber and toe bolts on GM's Epsilon II platform with these hex chromate free 700 salt spray tested cam bolts from SPC. GM's hardware is TTY and needs to be replaced with every alignment. SPC's hardware...

Replace the factory torque-to-yield (TTY) rear camber and toe bolts on GM's Epsilon II platform with these hex chromate free 700 hour salt spray tested cam bolts from SPC. GM's hardware is TTY and needs to be replaced with every alignment. SPC's hardware...

Replace the factory torque-to-yield (TTY) rear camber bolts on GM's Epsilon II platform with these hex chromate free 700 hour salt spray tested cam bolts from SPC. GM's hardware TTY and needs to be replaced with every alignment. SPC's hardware can be...

The 81139 is inexpensive, portable, and very accurate. It has a simple leveling adjustment of +/-3deg. Housed in a durable, non-magnetic casing with a magnetic head that attaches firmly to rotors or spindles. ***REPLACEMENT BUBBLE VIAL #81134...

This sleeve puller is designed to pull the OE Super Duty camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve. Heat treated high strength steel. Single-unit design with no loose parts.This Part...

This cam bolt kit provides caster adjustment by replacing one of the two factory bolts that mount the rearward pivot of the front lower control arm bushing bracket. Elongation of the pre-marked factor holes is required - we recommend using rotary file...

This kit bundles a pair of EZ cams (p/n 81260) for adjusting camber +/-1.5 degrees, with two 72355 Caster Bolts. Together these parts overcome the non-adjustable factory design to provide complete adjustability for improved handling, educed tire wear,...

Extend Camber adjustment range on Cadillac SRX. This extended cam kit expands the adjustability available versus the OE components. The 72285 cam delivers +1 to -3 with elongation of the adjustment slot. Use SPC rotary file PN 85130 or similar to easily...

Use this fixed change shim to adjust rear camber on the Honda Fit +-1.0deg. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you...

Use this fixed change shim to adjust rear toe on the Honda Fit +-0.10deg. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See lots of Fits? Consider shim kit 71790, it has two each of every shim to make sure...

This easy to install full contact shim set is specifically designed for the Internationl models of the Honda Civic Type R. The specific regions include the following years: European (2007-2008) and Asian (2007-2010) (will NOT fit North American models)...