Camber Kits

Double the range of rear camber and toe adjustment on the popular Camaro to increase handling performacne and minimize tire wear. Remove and replace the OE cam bolts with our 87430 kit for +- 1.0deg camber change and +- 2.0deg toe change. No slotting or...

Use this kit to change caster and/or camber on these vehicles. Simply replace the existing upper control arm mounting bolts with these cam bolts for caster/camber changes up to +- 2.0deg. California Residents WARNINGInstallation InstructionsThis Part...

Replace bent, damaged, or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again. Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500, or Colorado rolls on...

Some users find that once they remove the plastic retainer from the original equipment cam on GM trucks, they can't get adjustment to hold. These lock plates are designed to provide a mechanical lock for the cam bolt to the guide pin. Simply dial in your...

This lock plate is designed to keep the front alignment angles in position by replacing the existing slotted cam. For newer models of GMC's 1500, 2500 and 3500 vehicles. California Residents WARNINGInstallation Instructions

Adjust rear camber on many non-adjustable Ford and Lincoln models with SPC's pantented EZ cam bolt. Simply replace the rear upper control arm to knuckle bolt with SPC's bolt and get +-0.75deg of camber adjustment to bring your vehicle back into...

Replace damaged or corroded factory alignment adjusters on the rear suspension of many Hyundai and Kia SUV models with these cam bolts from SPC. These bolts are designed to provide the same adjustment range as the original components while providing...

Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you the same adjustment range as the factory cam, +-2deg...

Install this cam and guide kit to quickly and accurately dial in camber on Jeep Grand Cherokee SRT8 and Trackhawk models. Even with the suspension loaded, this kit makes changes of up to +-1.5deg camber fast and easy. California Residents WARNINGThis...

This sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve. Heat treated high strength steel. Single-unit design with no loose parts. California Residents...

Replace the non-adjustable rear upper control arm on the Nissan Altima with SPC's fully adjustable arm to get +-2.5deg of camber change. This remove and replace arm is perfect for traditional alignment correction, to enhance handling, or as a direct...

This is the perfect kit for lowered Zs or G35s and G37s Infinitis. Provides additional camber and comes with a larger offset toe cam to bring the toe angle back into range. Use the 85130 rotary file to elongate the toe slots. California Residents...