SPC Performance

This sleeve will easily change Camber and/or Caster 1.00° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

These shim kits let you change front camber on Dodge, Freightliner and Mercedes Sprinter Vans. Their unique design allows the technician to 'lock' the alignment settings. These shims install quickly...

This sleeve will easily change Camber and/or Caster 1.50° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

This sleeve will easily change Camber and/or Caster 1.50° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...

This sleeve will easily change Camber and/or Caster 1.50° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...

This sleeve will easily change Camber and/or Caster 1.50° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

These wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned...

This 1-1/2" socket is useful for adjusting both the OEM and our popular 23130 & 23180 sleeve series for Ford and Mazda 2 & 4WD trucks with pinch bolt style suspension. FOR 1/2" DRIVES. California...

This sleeve will easily change Camber and/or Caster 1.25° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...