Bushing Kits

SPC Performance Replacement Bushing Kit For Audi Control Arms(81353, 81363, 81373)

Honda Adapter #75980 is used in conjuction with the 72509 ball joint pressadn are used with the #67465 Honda Civic camber kit. You need these adapters to push the old bushing out of the stock arm adn also to install the new bushing included in the 67465...

Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by servicing the suspension bushings on the vehicle vs. removing...

Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service kit. Mechanical power screw quickly and easily removes worn bushings and installs them without damaging the control arm. Set included C-Frame,...

This proprietary SpecRide bushing replacement kit provides superior performance and durability for your 25560 Nissan Titan arms. Each kit includes 8 SpecRide bushings with free moving pivot sleeves designed to survive the toughest environments and...

Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased & booted to protect against contaminants. The bonded rubber outer...

Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased & booted to protect against contaminants. The bonded rubber outer...

This sleeve will easily change Camber and/or Caster 1.25˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change...

This sleeve will easily change Camber and/or Caster .75˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

This sleeve will easily change Camber and/or Caster .50˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

This sleeve will easily change Camber and/or Caster .25˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

Replace your worn fronter lower control arm bushings on the 2018 and newer Jeep Wrangler (JL) or Gladiator (JT) with this replacement bushing from SPC. Sold each, use two bushings per control arm, up to four per vehicle. Need caster or front pinion angle...