Bushing Kits

Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased & booted to protect against contaminants. The bonded rubber outer...

Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased & booted to protect against contaminants. The bonded rubber outer...

This sleeve will easily change Camber and/or Caster 1.25° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change...

This sleeve will easily change Camber and/or Caster .75° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

This sleeve will easily change Camber and/or Caster .50° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

This sleeve will easily change Camber and/or Caster .25° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

Replace your worn fronter lower control arm bushings on the 2018 and newer Jeep Wrangler (JL) or Gladiator (JT) with this replacement bushing from SPC. Sold each, use two bushings per control arm, up to four per vehicle. Need caster or front pinion angle...

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67668 for many 2000 to 2009 models. Part replaces OE #'s 20254AE01A...

Replace failed cross axis balljoints on the rear upper control arm of GM's popular Lambda platform vehicles with SPC's replacement xAxis ball joint. California Residents WARNINGThis Part...

The xAxis Sealed Flex Joint is a technology step up for suspension joints and linkages. xAxis delivers reduced compliance vs rubber, improved durability vs spherical bearings, and increased angularity vs urethane. Featuring sealed ends to keep grease...

Skunk2 Racing is proud to announce the release of its Spherical Bearing Compliance Bracket for the front lower control arms on the '96-'00 Civic. Skunk2 Racing's Billet Compliance Bracket w/ Spherical Bearings are direct replacements for your soft and...

This pair of red polyurethane transmission torque arm bushings from Rugged Ridge are easy to install and add stability to your shock mount.WarrantyThis Part Fits:YearMakeModelSubmodel1972-1983JeepCJ5Base1977-1980JeepCJ5Golden...