SPC Performance

Direct negative camber change in -.25deg increment is made quickly and accurately with this shim. Combine this camber shim with a toe shim (71051-71055)to get the exact camber and toe change that is...

Direct negative camber change in -.50deg increment is made quickly and accurately with this shim. Combine this camber shim with a toe shim (71051-71055)to get the exact camber and toe change that is...

Make rear wheel alignment changes on these twist beam axles with SPC's stackable fixed change shims. Change camber in +-.25deg increments and toe in +-.10deg increments. Combine a toe shim with a...

Make rear wheel alignment changes on these twist beam axles with SPC's stackable fixed change shims. Change camber in +-.25deg increments and toe in +-.10deg increments. Combine a toe shim with a...

Use this pair (2) of cam bolts to double the adjustment range for rear camber and toe on GM's Epsilon platform. The OE cams only give one degree of change, this is often not enough camber and you may...

Replace the factory torque-to-yield (TTY) rear camber bolts on GM's Epsilon II platform with these hex chromate free 700 hour salt spray tested cam bolts from SPC. GM's hardware TTY and needs to be...

Replace the factory torque-to-yield (TTY) rear camber and toe bolts on GM's Epsilon II platform with these hex chromate free 700 salt spray tested cam bolts from SPC. GM's hardware is TTY and needs...

This full contact rear series of 18 shims includes 2 toe shims each (+- .10deg,+- .20deg,+- .30deg,+- .40deg,+- .50deg) and 2 camber shims each (+ .25deg, + .50deg,- .25deg,- .50deg) for rear wheel...

This full contact rear series of 18 shims includes 2 toe shims each (+- .10deg, +-.20deg, +-.30deg, +-.40deg, +- .50deg) and 2 camber shims each (+ .25deg, + .50deg- .25deg, - .50deg) for rear wheel...

Make rear wheel alignment changes on these twist beam axles with SPC's stackable fixed change shims. Change camber in +-.25deg increments and toe in +-.10deg increments. Combine a toe shim with a...

Direct positive or negative toe change in .10deg increment is made quickly and accurately with this shim. Combine this toe shim with a camber shim (71051-71056) to get the exact toe and camber change...

Make rear wheel alignment changes on these twist beam axles with SPC's stackable fixed change shims. Change camber in +-.25deg increments and toe in +-.10deg increments. Combine a toe shim with a...