Fabrication

This Edelbrock Fuel Line Kit #8101 is temperature, gas and oil resistant. This kit is made from reinforced synthetic Chlorinated Polyethylene rubber hose with a nylon inner braid for strength. Features a -6 AN inlet fitting and a 1/8" pipe fitting with...

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds. Machined from solid brass.Warranty

The Edelbrock ProClassic Fuel Hose Kit #80913 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel...

Edelbrock part #8090 Inverted Flare (3/8) Fuel Fitting for Edelbrock Square-Bore & AFB Carbs. The fitting comes with a sealing washer and has 5/8-20 threads. This fitting is standard on the E.P.S. marine carburetors, 1409 and 1410.Warranty

Edelbrock part #8089 Banjo Fitting is designed for Edelbrock Square-Bore & Carter AFB Carburetors.Warranty

The Edelbrock Fuel Hose Kit #8088 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet...

Edelbrock part #8087 is a -6AN x 5/8"-20 Fuel Inlet Fitting for Edelbrock Square-Bore & Carter AFB Carbs. This fuel inlet fitting is designed to replace the EPS carburetor's existing fuel inlet fitting, allowing the use of braided fuel line.Warranty

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb. This Fitting will fit the rear vacuum port of all Edelbrock four-barrel carbs.Warranty

Edelbrock part #8078 Brass Hose Fitting For S/B Chrysler Intakes is a single barb coolant hose fitting. The fitting has a 1" single barb nipple and 3/4-14 NPT threads on the opposite end. The fitting is perfect for any coolant port bypass that needs this...

Edelbrock part #8052 Steel has a variety of pipe plugs to fill your application. Be it your nitrous system or intake manifold, we offer many different sizes, quantities, and finishes to close the unused holes. Kit contains (2) 1/8 in. NPT, (2) 1/4 in...

Edelbrock part #3577 Regulator Fitting is a -6 AN fuel inlet fitting is for use with fuel mounted regulators that come included with all Pro-Flo EFI systems. The fitting will screw directly onto the fuel rail mounted fuel regulator and provide you with a...

Edelbrock part #1497 Replacement Fuel Inlet Fitting is a 3/8" single barb nipple with 5/8-20 threads. This fitting will replace the factory fitting that comes on the Edelbrock EPS, AVS and AVS 2 carburetors. The fitting is gold iridited for durability...