Intake Manifolds

Edelbrock part #2701-CP Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented Dual-plane, low-rise...

Edelbrock part #2665 Performer 351-4V intake manifold is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads. Manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32"...

Edelbrock part #2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open air space that separates the runners from the hot engine oil resulting in a...

Edelbrock part #26013 Performer Air-Gap intake manifold Designed for 1955-86 262-400 c.i.d. small-block Chevys. The Performer Air-Gap intake manifold features the air-gap design for the ultimate street performance in the idle to 5500 rpm range. This...

Edelbrock part #26011 Performer Air-Gap intake manifold Designed for 1955-86 262-400 c.i.d. small-block Chevys. The Performer Air-Gap intake manifold features the air-gap design for the ultimate street performance in the idle to 5500 rpm range. This...

Edelbrock part #2601 Performer Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys. This Performer Air-Gap intake manifold features an air-gap design for the ultimate street performance in the idle to 5500 rpm range. This...

Edelbrock part #2561 Performer RPM Q-Jet marine intake manifold is designed for spread-bore carbs but also works with Edelbrock square-bore carbs without adapter on street 396-502 c.i.d. Chevy V8's with large oval-port (1975 and earlier) heads. This...

Edelbrock part #2516 Performer RPM Vortec marine intake manifold is based on the powerful Edelbrock #7101. This single four-barrel intake is designed for, marine engines utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or...

Edelbrock part #2506 Performer RPM Q-Jet marine intake manifold is designed for 1987-95 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. The Edelbrock Performer RPM Q-Jet #2506 intake manifold is designed specifically for demanding...

Edelbrock part #2504 Performer RPM Q-Jet marine intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. This Performer RPM Q-Jet intake manifold is designed specifically for demanding marine...

Edelbrock part #2475 CH-6B Chrysler 6-pack intake manifold is designed for 440 c.i.d. Chrysler engines with 3x2-bbl. carbs, also fits 413 and 426 Wedge. #2475 is stock replacement/street legal part for 440 V8's with OEM 3x2-bbl. carbs; 1968-71. This...

Edelbrock part #2194 Performer intake manifold is designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane design that is tuned for excellent throttle response from idle to 5500 rpm. The Performer Holden...