Intake Manifolds

Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers...

Edelbrock part #5409 Performer RPM Dual-Quad intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines with factory large port or with our Performer RPM W-series heads #60809 or #60819. The manifold deliver performance with...

Edelbrock part #5091 Torker II 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.Installation InstructionsInstallation...

Edelbrock part #5081 Torker II 351W intake manifold is designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit "Boss 351" Cleveland. Manifold not equipped with...

Edelbrock part #5076 Torker II intake manifold is designed for high Performance's street 340-360 c.i.d. Chrysler V8's. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Will not fit 1992 and later Magnum...

Edelbrock part #50665 Victor 460 EFI intake manifold is based on our popular Torker II #5066 for 429/460 c.i.d. Ford V8 applications. It has cast and vertically machined fuel injector bosses for proper fuel injector placement. It is also drilled to...

Edelbrock part #5056 Torker II 460 intake manifold is designed for 429/460 c.i.d. Ford V8's used in marine and high performance applications. Manifold not equipped with EGR. Will fit 429 Cobra-Jets. Manifold will not accept stock Motorcraft spread-bore...

Edelbrock part #5061 Torker II 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier). Manifold not equipped with EGR. Will not fit "tall block" V8 engines. The Torker II 2-O intake...

Edelbrock part #505651 Torker II Pontiac EFI intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood. This manifold offers a...

Edelbrock part #50565 Torker II Pontiac EFI intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.Installation...

Edelbrock part #5056 Torker II Pontiac intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.Installation...

Edelbrock part #5021 Torker II 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. Will not fit Boss 302. Manifold not equipped with EGR. Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Edelbrock carbs will work with...